Novel Coating Technology Press Release

Press Release

October 1, 2015

Transportation Electric Power Solutions (TEPS) Consortium (Israel) and Clear Metals Inc. (“CMI”, Canada) are pleased to announce the launch of a joint development Eureka project focused on “Novel Coating Technology for Performance Enhancement of Advanced Lithium Ion Batteries for E- Automotive markets”.  The project is intended to accommodate CMI proprietary technology for electrochemical coatings of Metal-Oxide compounds on powdered conductive materials comprising advanced cathodes. As opposed to conventional methods for metal oxide films’ deposition that are primarily intended for deposition on flat surfaces, CMI’s unique technology is capable of achieving high uniformity of coatings on even the most complex “3D” structures such as highly developed surfaces of graphite powdered particles as well as other materials used in LIB cathode and anode structures.

The project is further intended to implement the coated cathodes into the next generation Li-Ion Batteries (LIB) enabling considerable improvement of the endurance of the 3rd generation LIBs and acceleration of their inroad into the E- automotive markets.

Continue reading

Canadian Printed Electronics Symposium

April 21-22, 2015: 2015 Canadian Printed Electronics Symposium (CPES) Montreal

CPE Symposium 2015 logoClear Metals Inc. in co-authorship with ACP (Advanced Clean Production) gives a presentation “Electrochemical Printing of Metal Oxides: Equipment and Process for Applications in Printable Electronics and Batteries”.

Recently Clear Metals Inc. (CMI) has developed a revolutionary electrochemical platform and rapid prototyping R&D equipment that enables the manufacturing of functional metal oxide coatings for advanced flat panel displays (electrochromic, OLED), touch screens, next generation transparent electronics products and energy storage products (thin-film batteries, Li-ion batteries, supercapacitors etc). CMI electrochemical platform can be used for deposition of a wide variety of oxide coatings including but not limited to ZnO, Al2O3, In2O3, SnO2, WO3, NiO, MnO2, V2O5, TiO2, and ZrO2.

CMI-printed elec benefitcs slideThe new electrochemical platform provides uniformity over large areas confirmed during laboratory trials performed in scanning electroplating unit. The method is unique in its ability to deposit coatings on a single side of a substrate without masking.

 

LOPEC

March 4, 2015: LOPEC

The 7th International Exhibition and Conference for Printed Electronics, the 6th Annual LOPEC Start-up Forum, part of the Business Conference is organized and initiated by the OE-A in cooperation with the European Commission (DG Connect) and Messe München GmbH

LOPEC bannerClear Metals Inc. in co-authorship with ACP (Advanced Clean Production)
gives an oral presentation “Electrochemical Deposition of Oxides: Equipment and Process for Applications in Photovoltaics, Touch Screens, Electronics and Energy Storage” on new electroplating equipment developed for deposition of thin metal oxide coatings on substrates with surface and bulk conductivity. Available oxide coatings include but are not limited to ZnO, Al2O3, In2O3, SnO2, WO3, NiO, MnO2, V2O5, TiO2, ZrO2, SiO2 etc. Continue reading

PV Team Meeting

November 3-4, 2014: PV Team Meeting

Organized by University of Bath, UK

PV Team LogoClear Metals Inc. in co-authorship with SemiMetrics Ltd. and University Northumbria gives an oral presentation “Electrochemical Deposition of Oxides” on CMI revolutionary electrochemical platform and unique lab scale equipment for metal oxide deposition for applications in photovoltaics and electronics.

Continue reading

CMI will attend IOP Conference

September 16, 2014: Conference “Advances in Photovoltaics”

Organized by Institute of Physics Ion and Plasma Surface Interactions Group, London, UK

IOP-Conf-bannerClear Metals Inc. in co-authorship with SemiMetrics Ltd. and University Northumbria presents a poster “Atmospheric pressure, low temperature equipment and process for functional oxide deposition in photovoltaics.” The poster reports on CMI revolutionary electrochemical platform and unique lab scale equipment for metal oxide deposition for applications in photovoltaics and electronics. Continue reading

D. Mark Durcan joins CMI Advisory Board

Mark Durcan HeadshotApril 19, 2013

We are pleased to announce that Mr. D. Mark Durcan has joined the advisory board of Clear Metals Inc. Mark Durcan is Chief Executive Officer at Micron Technology – a world leader in the manufacturing, marketing and sale of semiconductor devices worldwide. Micron had annual sales of $8.05 Billion in 2012 and a current market cap of $9.68 Billion. Continue reading

CMI develops in-line TCO deposition process

Newspapers on whiteMarch 6, 2013: CMI develops in-line TCO deposition process.

Clear Metals Inc. (CMI) announces successful testing continuous in-line metal oxide deposition process based on the company’s proprietary technology. New technology removes restrictions on the maximum substrate size as well as enables a potential break-through in roll-to-roll processing in flexible display manufacturing. Read full article →

What is CMI?

At Clear Metals Inc. (“CMI”) we are focused on development and commercialization of the world’s leading edge metal oxide deposition technology that enables manufacturing of high efficiency Photovoltaic cells & modules, advanced flat panel displays and next generation transparent electronics products. Our breakthrough technology helps smart-phone, LCD-TV and Photovoltaic cell & module manufacturers to make their current products more affordable while enabling a new era in high efficiency PV cell and consumer electronics manufacturing.

PaperTab Debuts

Papertab screenshotPaperTab: A Tablet As Flexible As Paper Debuts At CES 2013

Here’s one exciting consumer gadget at CES 2013 that isn’t a television: The PaperTab, which looks and feels just like a sheet of paper, may one today overtake today’s tablets. Read article →